DIN 3269-1-1988

地段和建筑物內飲水裝置用管件.止回閥PN10.要求

(Valves for domestic drinking water installations; check valves PN 10; requirements)

DIN 87101-1975

垂直型.公稱寬度50-150.公稱壓力1.自閉式止回閥.符合公稱壓力的法蘭連接

(Non-return flaps (storm valves), self-closing, vertical type, nominal diameter 50 up to 150, nominal pressure 1; mating dimensions for flanges according to nominal pressure 10)

DIN 3441-5-1984

非增塑聚氯乙烯管件.壓緊止回閥PN6和PN10.尺寸

(Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions)

DIN 87104-1975

DIN87101止回閥用閥插入件

(Flap Inserts for Non-return Flaps in accordance with DIN 87101)

DIN 3247-1985

無止回閥.帶法蘭的吸濾器

(Flanged suction strainers without non-return valve)

DIN 87106-1975

DIN87101止回閥用定位裝置

(Locking Devices for Non-return Flaps in accordance with DIN 87101)

DIN 3259-1985

帶止回閥的法蘭吸濾器(腳閥)

(Flanged suction strainers with non-return valve)

DIN 477-4-1982

氣瓶閥.輕便儲氣瓶頸的止回閥

(Compressed gas cylinder valves; swing check valves for camping-cylinders)

DIN 3538-1986

煤氣裝置管件.止回閥.內螺紋接頭

(Valves for gas installations; butterfly valves; female threaded ends)

DIN 3248-1985

無止回閥.帶內螺紋連接的吸濾器

(Threaded suction strainers without non-return valve)

DIN 3249-1985

帶止回閥.內螺紋連接的吸濾器(腳閥)

(Threaded suction strainers with non-return valve)

DIN EN 1074-3-2000

供水用閥門.適用性要求和專用檢查試驗.第3部分:止回閥

(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000)

DIN 74280-1998

空氣制動系統.止回閥

(Air braking systems - Check valve)

DIN EN 13709-2003

工業用閥.鋼制球閥、球狀截止閥和止回閥

(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002)

DIN 3845-1981

暖氣管件.帶套管接頭的銅合金制PN16止回閥.尺寸.材料

(Valves for heating installations - Copper alloy check valves PN 16 with screwed sockets - Dimensions, materials)

DIN EN 12094-13-2001

固定式消防系統.氣體滅火系統用元件.第13部分:止回閥和非止回閥的要求和試驗方法

(Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; German version EN 12094-13:2001)

DIN 86066-2002

止回閥用鑄鋼焊入式彎頭.DN50至150,PN10的法蘭接合

(Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10)

DIN 58362-7-2002

輸液.輸液器和附件.第7部分:止回閥

(Infusion - Infusion equipment and accessories - Part 7: Check valves)

DIN EN ISO 15761-2003

石油和天然氣工業用規格為DN100及更小的鋼閘閥、球閥和止回閥

(Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text))

DIN 87107-1975

DIN87101止回閥用扁墊圈

(Gaskets for Non-return Flaps in accordance with DIN 87101)

DIN 87103-1975

DIN87101止回閥的罩蓋

(Covers for Non-return Flaps in accordance with DIN 87101)

DIN 87102-1975

DIN87101止回閥的外殼

(Casings for Non-return Flaps in accordance with DIN 87101)

DIN 87105-1975

DIN87101止回閥用帶凸肩的閉鎖螺釘

(Screw Plugs with Cylindrical Extension for Non-return Flaps in accordance with DIN 87101)

DL/T923-2005

火力發電用止回閥技術條件

　

GB/T1855-1993

船用法蘭鑄鐵單排吸入截止止回閥箱

Marine flanged cast iron single arrangement suctio stop check box valve

GB/T1853-1994

船用法蘭鑄鋼舷側截止止回閥

Marine flanged cast steel over board stop check valve

UL 1469-1995

回流專用止回閥的閥身強度和液壓損失率檢驗

(Strength of body and hydraulic pressure loss testing of backflow special check valves )

JIS F7372-1996

造船.鑄鐵5K回轉式止回閥

(Shipbuilding -- Cast iron 5K swing check valves)

JIS F3058-1996

鑄鋼立式波浪止回閥

(CAST STEEL VERTICAL STORM VALVES)

JIS F7356-1996

造船.青銅5K升降止回閥

(Shipbuilding -- Bronze 5K lift check valves)

JIS F7373-1996

造船.鑄鐵10K回轉式止回閥

(Shipbuilding -- Cast iron 10K swing check valves)

JIS F7371-1996

造船.青銅5K回轉止回閥

(Shipbuilding -- Bronze 5K swing check valves)

JIS F7495-2000

造船.球墨鑄鐵10K旋壓止回閥

(Shipbuilding -- Spheroidal graphite iron (ductile iron) 10K screw-down check globe valves)

JIS F3060-1996

鑄鋼旋壓立式波浪止回閥

(CAST STEEL SCREWDOWN VERTICAL STORM VALVES)

JIS B8664-2001

液壓動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥.安裝表面

(Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces)

ISO 9952-1993

農業灌溉設備.止回閥

(Agricultural irrigation equipment; check valves)

ISO 15761-2002

石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥

(Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries)

ISO 15500-3-2001

道路車輛.壓縮天然氣(CNG)燃料系統元部件.第3部分:止回閥

(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve)

ISO 5781-2000

液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.裝配面

(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces)

SY/T5215-2005

鉆具止回閥